Little Light (Indicator) (#15BP)

Description

“Little Light” (#15BP)

The little light plugged on your electric tape will show you (by night) if your fence charger is powerful enough.
 

This little flashing light allows you to see from 50 yards if your fence is working fine.
This light insulator needs a minimum of 4000 volts on the fence to flash properly.
New LED technology making it brighter and more durable than the previous lamp.

If the light is poor or invisible at night, either your fence is in contact with the vegetation or worse, your fence charger is too weak.

Little Light installation instructions for Bi-Polar tape

Bi-Polar Tape
5 filaments = FENCE
5 filaments = GROUND

No more connection with the ground, as the 5 bottom wires of the tape replaces the ground rod so no ground rod.

• 1. Switch OFF your fence charger
• 2. On your fence, pick an insulator that you can see from your house…
• 3. Replace it with the Little Light that will blink with each electrical pulse.

Unscrew / replace/ re-screw / that’s all. Same controls, but you will “see” that on Bi-Polar system the power of the pulse is maximum (because of the straight connection with your charger) whatever the season and as a bonus and even a “reasonable” amount of weed, contact won’t affect the fence.